Permanent Magnet Coupling- Adani Power
Kimax has successfully installed the project for Energy Saving at Adani Power (Mundra) Ltd. Gujarat.
Adani Power Ltd. Is a part of the Adani Group and is the largest private thermal power producer in India. They have a power generation capacity of 12,450 MW and a 40 MW solar project in Gujarat.
Project Details
| COMPANY | Adani Power Ltd. Mundra, Gujarat, India |
| APPLICATION | CCW Pump |
| MOTOR POWER | 250kw |
Pre-Installation Data
| MOTOR ACTUAL POWER | 240Kw |
| MOTOR SPEED | 1480RPM |
| CURRENT | 13.85A |
| VOLTAGE | 11000 Volts |
| PRESSURE | 5.2 Kg/Cm2 |
Post-Installation Data
| GAP BETWEEN PLATES | 7.5 mm |
| MOTOR ACTUAL POWER | 200 Kw |
| MOTOR SPEED | 1330RPM |
| CURRENT | 11.7A |
| PRESSURE | 4.4Kg/Cm2 |
| ELECTRICITY SAVING | 16.67% |
Steps for installing the Permanent Magnet Coupling
1 Remove Protection cover and screw of the flange.
2. Remove the traditional coupling and unscrew the motor.
Move the motor with the help of pulley/crane.
3. Remove the traditional coupling’s flange.
4. Install Motor’s flange.
5. Install pump’s flange along with the PM Coupling.
6. The Motor is pivoted into place and aligned.
7. After Aligning, lock the flange and adjust the Gap.
8. After adjustment of gap, PMC installation is completed. Put the
coupling protection cover and it is ready to operate.
